Leaking Stromberg 150 Cd Jet Adjuster

Chris Taylor, 14-Aug-2006, 05:21pm on TSSC

There is an O ring between jet adjuster and jet housing, and another O ring seal between jet housing and float chamber. Either one could be leaking if you have disturbed them. Easy enough to replace, and doesn't need you to take off the float chamber. I suggest you unscrew the jet housing complete, so you can properly inspect the jet and replace both O rings. If you carefully count the number of turns it takes to undo the jet adjuster, you should get the mixture back close to what it was. But you will probably need to re-centre the jet if you do this (see manual) so you'll be setting up the mixture from the "jet fully screwed up to the top" position

Copyrights to all content on this site are those stated by the creator and/or the Webpage from where it is LINKed. The owner of this site does not claim copyrights to such content.