Engine Mounts
22px_std_bgr_tt.png

…..With alll the space around the engine, it is really quite feasible to see what's going on and what needs to be moved where to get things to fit.
I am assuming you are talking about a Mk2 Herald chassis where the engine mountings fit on the suspension towers.
You need to unbolt the mounts from the chassis, and when refitting the engine, lower it down a little further forward than its final position and then move it back so the mountings approach their final position "horizontally" as it were. You only need to avoid the lip above the mounting face, so I suppose I am talking about half an inch. Loosening the nut on the stud where the mount fits to the engine front plate will help so you can juggle everything into position.

Posted By : Chris Taylor, 16-Jun-2006, 07:03pm on TSSC

22px_std_bgr_tt.png
Copyrights to all content on this site are those stated by the creator and/or the Webpage from where it is LINKed. The owner of this site does not claim copyrights to such content.